Version 1.4.0 (1/21/2016)

  • CueServer Studio 2
    • Feature Added ability to set the Input/Output direction of DMX Ports in the DMX Port Settings panel.
    • Feature Added a new Network Settings window that allows the network mode to be switched between Single and Dual LAN configurations (on hardware that supports this).
    • Feature Added preferred CueServer model selection to DMX Port Settings panel (used to show the appropriate DMX port options).
    • Feature Added a warning to the DMX Resources Settings panel when the allocated number of universes exceeds the licensed number of universes.
    • Feature Added warnings to the DMX Port Settings panel when the port direction or universe number is questionable.
    • Feature Added ability to duplicate Cues, Groups, Macros, Timers, and Rules using the list’s settings menu or contextual menu.
    • Feature Added a warning icon that shows when a local CueServer is discovered but is not accessible on the network because it is on a different subnet.
    • Feature Added the ability to specify what ranges of DMX channels are broadcast to each port of a KiNET v2 device.
    • Feature CueServer devices now show “A” or “B” after their IP Address if the device has Dual-LANs enabled to indicate which LAN the device is connected via.
    • Feature The Macro editor now fills the available window space with the script editor.
    • Feature The “create new show” dialog window now opens with the text field selected.
    • Feature Added buttons to the System Log panel that will add marks or text to the log file.
    • Feature Show files in the Navigator Window are now listed in alphabetical order.
    • Feature Devices that go offline in the Navigator Window now collapse their show listing, loose their hierarchical control and cannot be edited.
    • Feature CueServer 1 models now appear in the device list in gray text.
    • Feature Opening a CueServer 1 model now provides a warning that CueServer Studio 2 cannot edit older CueServer models.
    • Feature The Device and Project lists are now sorted by name by default.
    • Feature Improved the Show Network Info window to display if the Internet is reachable from the local machine.
    • Feature New shows files now default to not transmitting or receiving DMX over Ethernet.
    • Feature The DMX Settings sub-panels are now scrollable when the content is larger than the parent window.
    • Feature The Universe Settings sub-panel now shows only the properties that apply to the selected input/output protocol.
    • Bug Addressed a problem that could cause the renumbering of resources to fail.
    • Bug Addressed a problem that caused a crash when offline show files contained more than about 375 of a single resource (such as Groups, Macros, Cues, etc.).
    • Bug Fixed a bug that caused active show changes to remote CueServers to not be updated properly in the Navigator Window.
    • Bug Fixed a bug that could cause the DMX Resource Settings bar graphs to draw improperly after user changes were reverted.
    • Bug Addressed a problem that could cause unwanted settings to appear in the universe settings after increasing the number of universes in a project.
    • Bug Fixed a bug that would cause the Done button in the License Code Window to redraw incorrectly in certain circumstances.
    • Bug Addressed a problem that caused remote CueServers to not show their online status properly.
    • Bug Addressed a problem that could cause the time to not be able to be updated on a CueServer if the host computer had more than one active network interface.
    • Bug Fixed a bug that caused the application to experience a long (30 second) delay when launching on a machine that was not connected to the Internet.
  • Firmware
    • Feature Added support for the CS-900 bi-directional DMX port hardware. Now, each DMX port can be switched to either an input or an output (or disabled).
    • Feature Added support for the CS-900 Dual-LAN hardware. Now, CueServer networking can run in one of two modes, (1) a single LAN that carries both lighting and management data combined with a built-in Ethernet switch between the two physical ports, or (2) dual separate LANs with management data on LAN A and lighting data on LAN B.
    • Feature Improved DMX port LED indicators to show additional port status information.
    • Feature Improved the scroll speed of adjusting LCD menu items.
    • Feature Whenever the system contacts a DHCP server, it is shown on the LCD display.
    • Feature Added the ON and OFF keywords to the TOGGLE command.
    • Feature Added ability for CueServer’s Ethernet ports to be “hot plugged” while the device is running.
    • Feature The LCD display now shows a small “null” icon next to the device’s IP address if there is no active link on that port.
    • Feature Added additional power-on hardware test for FPGA bitstream.
    • Feature A new DHCP fallback address of 10.0.1.234 has been set for the primary interface, and the secondary interface (if present) will fallback to 192.168.1.234.
    • Feature Changed the DHCP function to timeout more quickly if a DHCP server could not be reached.
    • Bug Fixed a bug that caused streaming cues inside of cue stacks to not record properly.
    • Bug Fixed a bug that caused KiNET v2 to not be received properly by some CK power supplies.
    • Bug Addressed a problem that could cause the timer and trigger daemons to crash if no show file is loaded.
    • Bug Fixed a problem that caused the csportd and csfpuid daemons to report that they were improperly killed during a firmware update.
    • Bug Addressed a problem that could cause cue numbers with decimal points to fail to record properly in certain circumstances.
    • Bug Fixed the warning during the update of apache configuration during a firmware update.
    • Feature Improved the factory initialization routine.
    • Bug Addressed a problem that caused a failed assertion when a web client was requesting channel values and no show was loaded.
    • Bug Addressed a problem that could cause a memory leak during an NTP lookup.
    • Bug Addressed a problem that could cause networking to fail if the device is connected directly to a laptop without a router.
    • Feature The LCD display now shows additional information about the boot process.
  • Kernel
    • Feature Updated to CueServer Kernel v1.3.
    • Feature Supports booting of CS-900 Hardware.
    • Feature Supports auto-update of FPGA bitstream.